Gudun Tsarin Tufafi:
1. Zane: Mataki na farko a cikin tsarin yin ado shine ƙira.Dangane da abubuwan da za a yi wa ado (irin su tufafi, takalma, jaka, da dai sauransu), mai zane zai tsara bisa ga bukatun mai siye kuma ya zaɓi salon da ya dace da launi.Bayan an kammala zane-zane, ana buƙatar daftarin zane a cikin masana'anta.Wannan tsari yana bukatar a yi taka tsantsan, domin idan aka yi kurakurai, za a bata lokaci mai yawa da kayan aiki
2. Yin farantin karfe: Bayan mai zane ya canza tsarin zane zuwa masana'anta, ana buƙatar ƙwararrun ma'aikata don yin farantin kayan ado.Wannan tsari yana buƙatar ya kasance mai tsauri kuma mai kyau, saboda farantin kayan ado shine ainihin ɓangaren aikin ƙirar.Bayan da aka yi farantin kayan ado, yana buƙatar gwadawa don tabbatar da cewa girman, layi, da launuka na ƙirar da ke kan farantin sun dace da tsarin zane.
3. Gyara: Bayan an gwada nau'in kayan ado, yana buƙatar gyara.Calibration mataki ne mai matukar mahimmanci domin yana rage yiwuwar yin kuskure yayin yin ado.A lokacin aikin gyaran, masu zanen kayan kwalliya da masu aikin kwalliya suna buƙatar yin aiki tare don gwadawa akai-akai don tabbatar da cewa kowane dalla-dalla daidai ne.
4. Tufafi: Bayan an gama gyara, za ku iya fara shigar da matakin yin kwalliya.Tsarin yin ado yana buƙatar haƙuri mai yawa da ƙwarewa, saboda kowane allura yana buƙatar amfani da shi daidai.Ma'aikatan sakawa suna buƙatar yin aiki akan ɗinkin masana'anta ta hanyar ɗinki bisa ga layin da ke kan allo.Gudun aikin aski yana da sannu a hankali, kuma kawai 100,000 zuwa 200,000 dinki ne kawai za'a iya yin ado a kowace rana.Yana buƙatar haƙuri mai yawa, maida hankali da ƙwarewa cikin cikakkun bayanai.
5. Kammalawa: Bayan an gama zaren ɗin, ana buƙatar zaren zaren ɓangaren ɓangaren da aka yi wa ado don tabbatar da kyau da daidaito.Wannan tsari yana buƙatar kulawa sosai da haƙuri, saboda tsararrun zaren ƙare ba kawai yana rinjayar kyawawan kayan ado ba, har ma yana rinjayar rayuwar kayan ado.
6. Wankewa: Bayan an gama zaren, ana buƙatar wanke sassan kayan ado.Tsarin wankewa yana da hankali sosai, yana buƙatar kulawa da hankali ga aikin da aka gama.Bayan an wanke, yana buƙatar bushewa kafin a ci gaba zuwa mataki na gaba.
7. Dubawa: Bayan wankewa da bushewa, ana buƙatar dubawa don tabbatar da cewa duk layin suna cikin matsayi da aka ƙayyade kuma babu kuskure.Sai bayan tabbatar da cewa duk cikakkun bayanai sun cika buƙatun ana iya siyar da shi ko isar da shi ga abokan ciniki don amfani.
Lokacin aikawa: Juni-10-2023